AFCONA 3775

牌號AFCONA 3775
廠家AFCONA Additives Sdn Bhd
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Leveling agent with very high defoaming effect for solvent-based coatings.

Product Properties:

  • AFCONA-3775 is an acrylic polymer tailor made for those applications that need good leveling as well as high defoaming effect like coil coatings and other foam sensitive systems. It is recommended as non-silicone leveling agent where silicone is not permitted due to intercoat adhesion problem.

AFCONA-3775:

  • Next to the fast initial leveling it also improve the last stage leveling (before the coating become not flowable anymore)
  • prevents foam formation
  • works as deareator and defoamer
  • does not interfere with intercoat adhesion

Most leveling agent stabilized foam due to good compatibility and low surface tension. However AFCONA - 3775 come with strong defoaming property as well as a very good leveling agent.

It is suitable for all solvent-based coatings, especially for:

  • All paint systems applied by roller or dipping, that needs next to a good leveling a strong defoaming performance without crater formation, like coil coatings and can coatings.
  • Sometime recommended to combine AFCONA - 3670 or AFCONA - 3700 to further improve substrate wetting and anti-crater properties.
  • 2 pack PU coatings and epoxies
  • All baking paints
  • Matt finished wood coatings and sealers.
  • Not suitable for unpigmented high gloss systems, because due to the high defoaming effect, it will give in-can haziness.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
AFCONA Additives Sdn Bhd 產品展示 種類
AFCONA 3758 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3778 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3034 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3236 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3085 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3775 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3031 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3750 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3779 Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved