AFCONA 3031

牌號AFCONA 3031
廠家AFCONA Additives Sdn Bhd
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Slip and levelling additive used mainly in metal and UV coatings.

Product Properties:

  • AFCONA-3031 is a polyether modified polysiloxane. It gives very good slip and the slip characteristic is oily type also called as wet look appearance. Therefore, it can enhance visually film thickness AFCONA - 3031 normally used in metal coatings like industrial baking systems, car refinish polyurethane top clear coats and other vehicle paint.
  • AFCONA - 3031 also widely used in UV coatings due to the good levelling and slip performance. However, it does not contain any reactive functional group that can cross-link with UV resin system.
  • Due to its high surface activity, AFCONA-3031 can interfere with intercoat adhesion when
recoated without sanding. If air is introduced by the application equipment, the use of small amounts of defoamers such as AFCONA-2020 and AFCONA-2022 are recommended.

AFCONA - 3031 is recommended in below systems:

  • 2K Polyurethane. It gives low sensitivity to inner bubble.
  • Industrial baking systems where baking temperature is less than 170°C. In normal case, AFCONA - 3030 is recommended for industrial baking systems. However, if higher slip is needed, AFCONA -3031 will be the better choice.
  • UV coatings. A lot of time, AFCONA - 3031 is selected for UV due to the less foam stabilizing effect and good compatibility.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
AFCONA Additives Sdn Bhd 產品展示 種類
AFCONA 3277 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3285 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3236 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3758 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3778 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3231 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3670 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3251 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3772 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3770 Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved