AFCONA 3750

牌號AFCONA 3750
廠家AFCONA Additives Sdn Bhd
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Wetting, leveling and flow control agent for solvent-based coatings with excellent anti-crater properties.

Product Properties:

  • AFCONA - 3750 is 52% solid version of AFCONA - 3700 for better handling in winter because the viscosity of AFCONA - 3700 very high, almost not pourable in winter. AFCONA - 3750 is a highly fluorocarbon modified acrylic polymer. It has very low surface tension and therefore, it can substitute and perform as silicones without the side effects of silicones.

  • AFCONA - 3750 reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent based coating.

  • Due to the low surface tension, it gives very good substrate wetting and normally recommended to combine with a silicone based leveling agent to gives optimum performance on leveling, anti-crater as well as flow control.

  • AFCONA - 3750 is widely used, especially in refinish topcoats as a good prevention for crater formation, caused by different environment of application sites.

AFCONA-3750 is an excellent anti-crater and substrate wetting agent. AFCONA-3750 is especially suitable for:

  • stoving enamels based on alkyd, acrylic and polyester resins
  • polyurethane coatings
  • two-pack epoxy compounds
  • air-drying alkyd systems
  • UV coating
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
AFCONA Additives Sdn Bhd 產品展示 種類
AFCONA 3034 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3778 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3777 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3779 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3277 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3730 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3285 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3775 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3250 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3772 Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,FDA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved