Silanogran PV

牌號Silanogran PV
廠家Kettlitz-Chemie GmbH & Co. KG
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Silanogran PV is the 50% granular form of a trimethoxy-silyl-group containing low molecular polybutadiene (formerly Polyvest 25) on a mineral carrier. The pure liquid polymer is sticky and highly viscous. Our granular form provides easier handling, avoids inaccuracy and insecurity while dosing and incorporating the material into the rubber compound. The compressed granules of Silanogran PV are packed in low melting PE bags with a net content of 1 kg (standard packaging). If purchasing one pallet i. e. at least 600 kg net, special packagings of 0.5 up to 2.5 kg net according to customers' requirements can be supplied. By this means extra weight will not be necessary, which also results in better hygiene conditions because there will not be any direct contact with the material.

Properties and Application

The active substance of Silanogran PV is a low molecular polybutadiene containing silane groups which react by means of their alcoxy groups (trimethoxy groups) and the silanol-groups-containing surfaces of silica and silicate fillers. The unsaturated polymer chains of Silanogran PV are integrated in the rubber matrix during vulcanization. Highest effectiveness is achieved in EPDM compounds containing silicates with a laminar structure (e. g. Sillitin, talc, mica and some grades of clay), but also in any other vulcanized rubber an improvement of the physical properties will be noticed. Sialnogran PV can be used in sulfur and peroxide cured compounds. Silanogran PV is usually dosed between 1-6 weight percent calculated on silica fillers. A special mixing sequence does not have to be observed. Silanogran PV can be incorporated in internal mixers and on mills as well.

The application of Silanogran PV results in an improvement of the curing properties as stated below:

  • Shorter curing time at equal scorch time
  • Better process ability of the uncured compounds by lowering Mooney Viscosity
  • Increase of tensile strength, modulus and tear resistance
  • Improvement of Compression Set
  • Decrease of abrasion
  • Minimized water absorption i. e. better electrical properties of cable compounds
  • Increase of dynamic proeprties
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Kettlitz-Chemie GmbH & Co. KG 產品展示 種類
Dispergator FL Slip Agent / Lubricant / Mold Release / Processing Aid
TAIC 50 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-44 VC Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator KB Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-40 TP Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran M Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator OX Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Haftolat Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-30 Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved