TAIC 50

牌號TAIC 50
廠家Kettlitz-Chemie GmbH & Co. KG
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹TAIC 50 and 70 are 50% resp. 70% preparations of triallylisocyanurate (TAIC) on extremely fine silica as carrier in powder form.

TAIC can be recommended especially as co-activator for peroxide curing, when excellent physical properties are to be reached, especially very low compression-set values even after aging and under extreme conditions. TAIC has proved to be effective within all kinds of different flour elastomers, HNBR and EAM (VAMAC); it can also be used with other polymers such as EPDM/EPM, EVA etc.

Due to the very low melting point of approximately 24 C, the pure TAIC can have a solid/crystalline or even liquid form, depending on the room temperature. Therefore the handling will be considerably improved when using the 50 and 70 % Kettlitz preparation. Besides, regarding the dispersibility, the powdery preparations show much better results compared to the liquid product.

At low temperatures (below 10 C) the product tends to crystallize, and, depending on the storage conditions (temperature and time), the state of aggregation of TAIC, especially TAIC 70, may change, which leads to caking of the powder. The product will easily revert to a free-flowing powder by mechanical influence. During processing resp. mixing, when the very low melting point is reached, the agglomerates decompose immediately anyway. Consequently dispersion problems are not to be expected and caking, which might occur, does not influence the product quality negatively.

To maintain the physical form of the product, we recommend storing TAIC 50 resp. TAIC 70 at temperatures between 10 and 20 C in a well-ventilated area protected against sunlight.

As dosage of peroxide and co-activator we recommend approximately 2:1 (peroxide to TAIC 50 or 70) on a basis of 100% active substance.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Kettlitz-Chemie GmbH & Co. KG 產品展示 種類
Dispergator KB Slip Agent / Lubricant / Mold Release / Processing Aid
Activin NT Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-44 VC Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-7 Slip Agent / Lubricant / Mold Release / Processing Aid
TAC/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-40 TP Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran SI-69/GR 50 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack NP-97/TY-40 Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Haftolat/P Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved