Antitack BTO-30

牌號Antitack BTO-30
廠家Kettlitz-Chemie GmbH & Co. KG
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Antitack BTO-30 is a dispersion of very fine magnesium stearate. Due to its additives (detergents, anti-rust and anti-foam agents) it can be used in batch-off-systems (dip tank or spraying system) as well as for Barwell equipment. Antitack BTO-30 was developed to prevent environmental pollution caused by heavy metal ions of the usual zinc stearate dispersions. The pure magnesium stearate which is used for Antitack BTO-30 has a melting point of 135 °C, but the material which remains on the surface of treated unvulcanized rubber sheets or strips melts already at approx. 90 °C. After melting, it penetrates into the rubber compound and has no influence on physical properties or rubber-metal (or rubber-textile) bonding.

In trials we ran in our lab concerning antitack properties, Antitack BTO-30 always showed the best results, also in comparison to several products of our competitors.

Customers who already have Antitack BTO-30 in use confirmed the excellent properties of this product. The most important points they mentioned were.
  • fast drying of treated rubber parts, so that further processing and storage can follow soon
  • the surface of treated rubber parts seems to be clean even at dilution rates of 1 : 10, due to the
very fine particle size of the used magnesium stearate
  • no foaming problems
  • pollution of batch-off equipment is minimized compared to the use of ?normal" antitack agents based on zinc stearate of products containing fillers (e. g. silica, chalk, bentonite)
  • very good antitack properties, and therefore high dilution rates

The fifth point has the consequence that less material is needed and this means lower costs for material and for cleaning periods.

Dilution ratio for first tests: 1:15 (Antitack BTO-30:H2O)
We propose to mix the concentrated antitack agent with water in a ratio of 1:1 first and to dilute it afterwards.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Kettlitz-Chemie GmbH & Co. KG 產品展示 種類
Antitack BTO-30 Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Pertac/GR Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Talcubex Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Haftolat Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-31 LF Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran Silanogran SI-69/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR/DAB Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FL Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack NP-97 Slip Agent / Lubricant / Mold Release / Processing Aid
TAC/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved