Antitack NP-97

牌號Antitack NP-97
廠家Kettlitz-Chemie GmbH & Co. KG
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Pure zinc stearate dispersion of small particles, developed especially for dip tank equipment. The stearate particles are only partially hydrophobic due to the special production process. Therefore the antitack agent within the dilution shows the tendency to rise to the upper third of the dip tank. While the compound leaves the dip tanks, it passes through the region of highest concentration and gets the optimum coverage of antitack agent. The partial hydrophobic character also leads to a faster drying of the layer on treated rubber parts. We also recommend Antitack NP-97 for procedures in which all of or part of the antitack agent stays on the surface of the compound during vulcanization (blanks). The zinc stearate layer on rubber parts melts at curing temperature (melting point approx. 115 °C) and is almost completely absorbed by the compound.

The grade of absorption depends on different conditions, e. g. the concentration of antitack agent, the scorch behavior and compatibility of the compounds etc. Antitack NP-97 causes no mold contamination, if the recommended dilution ratio is observed and the surface finish of the vulcanizates will be improved.

Treated rubber sheets show a slightly rough surface (can be easily fed into extruders, no slipping during storage on pallets), and visual control of the antitack film is possible.

The concentrate should be stirred before use (this will result in lower viscosity and therefore easier handling/homogeneity).

Dilution ratio for first tests: 1:10 (Antitack NP-97:H20)
We Propose to mix the concentrated AA with water in a ratio of 1:1 first and to dilute it afterwards.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Kettlitz-Chemie GmbH & Co. KG 產品展示 種類
TAIC 50 Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator FL plus Slip Agent / Lubricant / Mold Release / Processing Aid
TAC/GR 70 Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator OX Slip Agent / Lubricant / Mold Release / Processing Aid
Dispergator SI/GR Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-15 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-31 LF Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-30 Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-40 TP Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran VES Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved