123,123,123

牌號

Atmer? 116

廠家

Croda Polymer Additives

分類

Anti-fogging Agent

介紹

Atmer 116 is recommended as an anti-fogging additive food wrap applications in conjunction with Atmer 1010 (only available in USA)

Mode of action

For use with PET, Atmer 116 should be dissolved in an appropriate solvent such as water or isopropyl alcohol and applied to the surface of the polymer. For polymers other than PET, Atmer 116 can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer where it helps to lower the surface tension and subsequently reduces water droplets allowed to condense on the plastic. The water droplets are then able to spread into a continuous, uniform layer on the fabricated film.

Feature and benefits

Guidelines for use

For PET use, Atmer 116 should be dissolved in a solvent at typical concentrations of 1-5%. Application quantities to the polymer surface depend upon the surface area, typical requirements range from 50 - 200 mg/m2 . For use other than PET, Atmer 116 can be incorporated into resin as supplied or via masterbatch / pre- blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion though, mechanical means are preferred.

Croda Polymer Additives 產(chǎn)品展示	種類
Atmer? 688	Anti-fogging Agent
Atmer? 185	Anti-fogging Agent
Atmer? 1440	Anti-fogging Agent
Atmer? 103	Anti-fogging Agent
Atmer? 7373	Anti-fogging Agent
Atmer? 121	Anti-fogging Agent
Atmer? 116	Anti-fogging Agent
Atmer? 7340	Anti-fogging Agent
Atmer? 1006	Anti-fogging Agent
Atmer? 7301	Anti-fogging Agent

牌號	Atmer? 116
廠家	Croda Polymer Additives
分類	Anti-fogging Agent
介紹	Atmer 116 is recommended as an anti-fogging additive food wrap applications in conjunction with Atmer 1010 (only available in USA) Mode of action For use with PET, Atmer 116 should be dissolved in an appropriate solvent such as water or isopropyl alcohol and applied to the surface of the polymer. For polymers other than PET, Atmer 116 can be dispersed evenly through the polymer in the melt phase. It migrates to the surface of the polymer where it helps to lower the surface tension and subsequently reduces water droplets allowed to condense on the plastic. The water droplets are then able to spread into a continuous, uniform layer on the fabricated film. Feature and benefits Improves transparency through packaging Improved durability of contents Improved presentation of food contents More appealing packaging content for consumers Guidelines for use For PET use, Atmer 116 should be dissolved in a solvent at typical concentrations of 1-5%. Application quantities to the polymer surface depend upon the surface area, typical requirements range from 50 - 200 mg/m2 . For use other than PET, Atmer 116 can be incorporated into resin as supplied or via masterbatch / pre- blend. Experience has shown that simple manual mixing prior to processing will normally give an acceptable dispersion though, mechanical means are preferred. Typical addition levels are 0.5 - 4%

Atmer? 116