Micro-Melt? A11-LVC Tool Steel

牌號Micro-Melt? A11-LVC Tool Steel
廠家Carpenter Technology Corporation
分類Steel
介紹Micro-Melt? A11-LVC tool steel is a high vanadium tool steel produced using the Carpenter Micro-Melt powder process. This grade possesses wear resistance superior to most other tool steels along with good strength and toughness characteristics. In addition, it provides higher toughness characteristics than Micro-Melt A11 alloy with slightly lower wear resistance.

Many of the benefits realized in the use of Micro-Melt powder metals, such as Micro-Melt A11-LVC alloy, are a direct result of the refined microstructure (smaller, more uniformly distributed carbide particles and a finer grain size) and the lack of segregation in the powder metallurgy product. These advantages include ease of grinding, improved response to heat treatment, greater wear resistance, and increased toughness of the finished tool.

Micro-Melt A11-LVC Tool Steel is equivalent in hardness, wear resistance and heat treating response to CPM 9V* alloy.

* CPM and 9V are registered trademarks of Crucible Materials Corporation.

Applications:
Micro-Melt A11-LVC tool steel may be considered for applications where less wear resistance than Micro-Melt A11 tool steel is needed but more toughness is required. The applications for which this tool steel should be considered may include:

Punches
Dies for blanking
Piercing dies
Forming rolls & dies
Cold heading
Steel mill rolls
Cold extrusion
Slitter knives
Shears
Pelletizer blades
Nozzles
Woodworking tools
Cold extrusion barrels
Cold extrusion liners
Plastic injection molds
Compacting tools
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Carpenter Technology Corporation 產品展示 種類
Micro-Melt? NCORR? Stainless Steel
Carpenter 2205 Stainless Steel
Carpenter? CTS? 204P Alloy Steel
AerMet? 100 Alloy Steel
Project 70+? Type 304/304L Stainless Steel
Micro-Melt? M4 Alloy Steel
Ten Star? High Speed Steel Steel
Carpenter Silicon Core Iron "A" Steel
Carpenter Stainless No. 10 (Type 384) Steel
Micro-Melt? T15 Alloy Steel

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved