Mediaplast EV/F

牌號Mediaplast EV/F
廠家Kettlitz-Chemie GmbH & Co. KG
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Mediaplast EV/F is an effective processing aid for the treatment of very sticky polymers, mainly EVA compounds. EVA types with vinyl acetate content of more than 40 % tend to stick to open mills, internal mixers and even extruder screws. Already a dosage of 2-3 phr Mediaplast EV/F eliminates this stickiness. To avoid the stickiness of rubber compounds containing other polymers, a dosage of only 1.5 phr will be sufficient.

Mediaplast EV/F does not have any influence on peroxide curing systems at a dosage between 2 and 3 phr. Only at a dosage of 5 phr or more, the curing and physical properties are influenced.

Mediaplast EV/F should be added at the beginning of the mixing process in order to avoid that the pure polymer gets in contact with open mills or internal mixers. It is therefore recommended to use the upside-down mixing method.

Mediaplast EV/F is a process aid based on carboxylic amide. The product has a good storage stability and is non-toxic.

Mediaplast EV/F does not influence the flame resistance properties of EVA cable compounds and does not contain any halogens.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Kettlitz-Chemie GmbH & Co. KG 產品展示 種類
Dispergator KB Slip Agent / Lubricant / Mold Release / Processing Aid
Mediaplast 60 Slip Agent / Lubricant / Mold Release / Processing Aid
Kezadol GR Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-44 VC Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-7 Slip Agent / Lubricant / Mold Release / Processing Aid
Silanogran VES Slip Agent / Lubricant / Mold Release / Processing Aid
TAC/GR 50 Slip Agent / Lubricant / Mold Release / Processing Aid
KETTLITZ Pertac/GR Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-40 TP Slip Agent / Lubricant / Mold Release / Processing Aid
Antitack BTO-31 LF Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,FDA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved