BMC 501

牌號BMC 501
廠家Bulk Molding Compounds, Inc.
分類聚酯,TS
介紹BMC 501 molding compound is a mineral filled, glass-fiber-reinforced compound suitable for compression, transfer and stuffer injection molding. It provides the user with good electrical properties and extremely low water absorption. This product has a low mold shrinkage and resists the formation of internal voids normally associated with glass filled compounds. Typical applications include slip rings, brush holders and connector bases. BMC 501 molding compound is produced in extruded form in a range on industrial colors. It is available in logs up to 12 inches in length or as precut slugs, of specific weight, in diameters from 1" to 2 ?". Within this range, smaller diameters are supplied as multiple extrusions and weight tolerances are plus or minus 5% up to a maximum of plus or minus 15 grams.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Bulk Molding Compounds, Inc. 產品展示 種類
BMC 2274 聚酯,TS
BMC T60-6002-WG-(15) 聚酯,TS
BMC 501E 聚酯,TS
BMC A50 (MS) 聚酯,TS
BMC 5209-12940 聚酯,TS
BMC 5307 聚酯,TS
BMC 2270 聚酯,TS
BMC 324 聚酯,TS
BMC T10(14) 聚酯,TS
BMC 800 聚酯,TS

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,FDA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved