AFCONA 3038

牌號AFCONA 3038
廠家AFCONA Additives Sdn Bhd
分類Slip Agent / Lubricant / Mold Release / Processing Aid
介紹Designed as anti-blushing agent for thermoplastic systems, anti solvent popping agent for all baking paints and act as flow agent for solvent-based paints.

Product Properties:

  • The properties of AFCONA - 3038 and 3037 are very similar. The main difference is that AFCONA - 3037 contains a highly compatible polysiloxane and AFCONA - 3038 does not contain any silicone. Thus, in terms of leveling and anti-crater, AFCONA 3037 performs better.
  • In overall, AFCONA - 3038 is more polar, thus it has better solvency power than AFCONA-3037. Therefore, it has better resin solubility, which eventually promotes better flow. This compensates the non silicone containing character. Therefore, AFCONA - 3038 is suitable for systems where silicone is not allowed or too high curing temperature systems, such as, coil and can coatings.
  • In general, AFCONA - 3038 have the same application usage as AFCONA - 3037.

Therefore, AFCONA - 3038 can be used as:

  • As anti-blushing agent for lacquer drying system like NC and Thermoplastic acrylic
  • Anti solvent popping and solvent boiling agent in baking paint
  • Additive to prevent streaking in chlorinated rubber systems
  • Additive to promote flow and leveling
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
AFCONA Additives Sdn Bhd 產品展示 種類
AFCONA 3730 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3277 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3085 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 6788 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3700 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3773 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3251 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3035 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3770 Slip Agent / Lubricant / Mold Release / Processing Aid
AFCONA 3758 Slip Agent / Lubricant / Mold Release / Processing Aid

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved